Mounted Wheels and Screw-on WheelsKeihin TOISHI
As the first company in Japan to succeed in the production of mounted wheels, with our technology and high quality products, we have won customers' confidence in wide field such as automobile and metal mold.
Please ask standard products and the stock products after referring to the PDF list.
Standard Selection of Mounted Wheels
1) Selection of Abrasive Grain
Kind of Grain | Application |
---|---|
QB | Grinding of stainless steel, quenched steel, alloyed steel |
A | Mainly for grinding of mild steel and general steel |
WA | Grinding of general steel and quenched steel |
PW, RA | Grinding of alloyed steel and quenched steel |
KE, SA | Grinding of alloyed tool steel and quenched steel |
C | Grinding of materials such as cast iron, non-ferrous metals and stones |
GC | Grinding of materials such as cemented carbide and hard ceramics |
2) Grain Size
Grain size is determined by factors such as the purpose of grinding, the work condition and shape/dimension of the wheel. Generally, grain sizes within the range of F46-F180 are used.
3) Grade
Generally, harder grade (grade L-Q) wheels are used because of the grinding condition and other constraints (such as operating speed, wheel shape and tools used).
4) Structure
Wheels of comparatively dense, high in grain ratio (structure No.8 and lower numbers) are usually used.
5) Bond
Vitrified (V) bonded wheels are most commonly used. However, impact resistant wheels such as resinoid (B), rubber (R), and urethane (UP) bonded wheels are also used.
The following is the list of mounted wheels widely used in metal mold field.
Please ask our company the stock etc.